Wet, dry, push, pull. Whatever method you choose, with time and a little practice you can create beautifully carved metal clay.
Carving in wet clay can give you curved edges and a sculptural feel. (See opening photo.) The clay is wet and the tools used are generally soft and rounded. Wet clay added to wet clay can be shaped by pushing the clay into place. Large amounts of wet metal clay can be cut off and small amounts brushed off with a wet brush. Often artists working “wet on wet” will simply brush each side of clay to be joined with a swish of water from a paint brush. Just about any tool can be used with wet metal clay and most people like to use traditional clay carving tools. In general carving wet clay involves a pulling technique, where the tool is being pulled toward you to remove clay. Another way to think about it is that the clay you are removing is moving toward you. Fortunately, clay carving tools are readily available and inexpensive.
The method that I prefer is carving dry clay, which creates crisp, clean lines even on textured surfaces. (See Cat Tail Brooch photo.)I use micro wood carving tools to do this. When using a wood carving tool, you will be using a pushing motion to remove clay. The clay you are removing will be coming off the tool in front of your tool. Keep in mind, you can achieve a slightly different result depending on whether you carve into leather hard or fully dry clay. Fully dry clay will create more resistance which can give you more control, especially when you are first starting.
I generally use a pencil to draw my carving lines if I am doing a detailed carving or I want very crisp, specific cuts in my clay. If I want a more organic look, I will only mark starts and stops for my lines. I will then do a very shallow carve to create a guide for the tool when I am carving deeper. This allows me to move the first cut along a line, easily seeing my marks in front of the tool. After the shallow groove is in, I let carving tool to track in the groove while making the deeper cuts.
The trick to nice clean carvings is to remove a little clay at a time. You can always remove more clay, but it is often difficult to cleanly add clay back where you have removed too much. Also, make sure your piece has good support under it where you are carving. If you are carving a domed piece, leave the piece on the form while carving.
As always, safety is key when you are carving. Clay carving tools can be sharp and pointy and can easily injure if you are not paying attention. If you are using wood carving tools, note that these are extremely sharp and placement of your hands so the tool is always moving away from your fingers is important.
Once you have control of your carving technique, you can carve shallow, intricate designs. You can also take a completely different approach and create negative spaces by carving all the way through a layer of clay to make an open space. The sky’s the limit. Enjoy!
Dona’s love of jewelry began as a child, sitting on the floor for hours with her mom’s jewelry box. She began designing her own jewelry in high school and spent time studying the work of a jewelry designer and family friend. During her career in high tech, Dona traveled the world fascinated by the cultures and their use of color and texture.
After leaving the high-tech world, Dona returned to her love of jewelry design. Her work is influenced by the places she has lived and traveled, bringing the textures of nature into her designs. Her love of stones is featured in her one-of-a-kind pieces which showcase the stones she has collected.
Dona currently teaches classes in jewelry design and techniques. Her students continue to be an inspiration to her, fascinating her with the unique perspective each student has conceptually and artistically.
Dona is an award winning artist. Her work is featured in stores and galleries throughout the Northwest and in print.