The syringe is my go-to form of metal clay for many techniques and applications. Not only is it great for setting cubic zirconia (smaller than 3mm) but also for creating texture and pattern.
There are so many creative possibilities with metal clay. One opportunity is to roll coils, or as many of us lovingly call “snakes”. Coils may be used for bails, decorative accents, or as a primary part of a piece.
Right off the bat, let me tell you, that rolled coils, are stronger than syringe coils. There is more metal content by volume in lump clay then there is in syringe clay. This extra strength comes with a trade-off, though. Coils take a while to dry when compared with a rolled-out, flat, piece of clay due to the extra volume. Give coils a good hour to dry in air. If after ten minutes of air-drying, your coil seems stable enough to put in a dehydrator or on top of a warmer, then go ahead and do that. Take care that you don’t move your coil too soon. Otherwise, you risk flattening one side or picking up texture from the tray.
OKAY! Let’s go!
Alcohol Ink: https://pmcconnection.com/embellishment-finishes/alcohol-inks.html
Guilder’s Paste: https://pmcconnection.com/embellishment-finishes/gilders-paste.html
Heat Patina: https://pmcconnection.com/firing/torch-kits/butane-torch.html
Copper Patina: https://pmcconnection.com/embellishment-finishes/patinas/antique-patina-1-oz.html
Liver of Sulphur:https://pmcconnection.com/embellishment-finishes/patinas/liver-of-sulfur-gel-squeeze-bottle-xlgel-1-oz.html
Metal Sealer: https://pmcconnection.com/pym-protectant-pump-6-oz.html
Jeannette Froese LeBlanc is a jewellery artist and the editor of www.cre8tivefire.com. She is definitely “A glass 1/2 full kind of person”! She has learned to enjoy the journey and not solely focus on the destination, which is something her kids taught her. Look down, look around, enjoy where you are.
Since the finest creations are made with the freshest of clay, keeping your clay fresh is critical for a good result. Moisture keeps binder in the clay at its peak performance, allowing you to best texture and join clay in your beautiful creations.
Everyone develops his or her particular way to store clay for the short- or long-term. Here are some tools and processes to know about while you develop yours. Many of these tools can be purchased or homemade.
While Working — Parked Clay
Never, never leave your clay out exposed to air while you are working on a creation. Continue reading…
PMC3 is a fine silver clay (.999 silver). True, fine silver PMC3 is more expensive than base metal clays. But the ease of working with and firing fine silver clay makes it a much better choice for beginners. From start to finish, PMC3 is the least complicated of all of the metal clays, which means that students can focus on the basics of construction, firing, and finishing without having to worry about complications created by the clay itself. Once you have those basic skills under your belt, there is an entire universe of textures and colors available to the metal clay artist.
With all metal clays, getting the basic texture and forming in place before the clay starts drying is key. Make sure your clay is sealed in an air-tight container when not being worked, and don’t hold the clay in your hands when you are not shaping it as your skin will pull moisture out of the clay.
Most important is to stay relaxed, have fun and experiment.
Still wondering about the other varieties of PMC clay? Here is a quick summary:
PMC3 – great for beginners; can be fired with a torch; low firing temperature allows for inclusion of findings, glass, and fire-able stones.
PMC3 paste – good for joining pieces; can be used for adding texture and painted designs; can be used with PMC3, PMC+, PMC Flex, and PMC Sterling.
PMC3 syringe – good for making repairs and filling grooves; can be used for drawing, building up forms and setting stones; can be used with PMC3, PMC+, PMC Flex, and PMC Sterling.
PMC Flex – designed to stay flexible when dry; good for bending, twisting and braiding; low firing schedule and can be fired with a torch.
PMC+ Sheet – flexible and does not stick to itself; great for origami, folding and weaving; can be laminated and used with paper punches.
PMC Sterling – great for added strength and shine, must be kiln-fired in carbon
PMC Gold – great for accents; low firing temperature; can be fired alongside silver PMC and can be torch fired.
Dona Miller: “Art, especially jewelry, is very personal. Through the constant inspiration of nature, animals and my dogs, I interpret the spirit around me into jewelry, using my love of stones and shaping metal. My designs and metal work incorporate the use of cut and natural stones to reflect the peace, love and joy of nature.”
Jewelry in article by Dona Miller.
“Metal Clay 101” is an ongoing series brought to you by PMC Connection and their instructors.
Always dry your clay completely before firing. If your clay is damp the moisture will try to escape quickly during firing and the piece will break or it could explode while torch firing.
Most metal clay pieces under 15 grams will take a day to dry. You can speed up the drying by using a mug warmer—remember to turn the piece every once in a while. Or you can use a food dehydrator that has been dedicated to non-food use. With these methods it will still take a few hours to dry out.
Do not torch fire metal clay that has been formed over a core, such as a ceramic bead, wood or cork clay.
Always follow the clay manufacturer’s directions for firing. The insert that comes with the clay will explain firing temperatures and timings.
Always fire metal clay, with a torch or with a kiln, in a well-ventilated area and have a fire extinguisher handy.
Keep that clay moist and you’ll be a happy artist! Clay can be stored in a small airtight container and if you are leaving the clay in-between projects, put a small piece of damp sponge in the container. It is also handy to have a small spray bottle handy to re-moisten clay if it starts to dry out.
Keep all the bits and shavings clean. All dried bits of clay can be re-hydrated into a paste, but keep the bits free of sandpaper grit and other work-space debris.
Before you open your package of clay, have your work-space ready. If you are rolling out the clay, have a non-stick work surface ready. (This can be a sheet of glass or plastic.) Lightly coat your hands and tools with olive oil. And lastly—know what you are going to do! Don’t wait for inspiration while your clay is drying out.
Torch Firing Demo:
Material Lists: (Click on images to enlarge.)
What Can You Use to Add Texture to Metal Clay?
Although it sounds clichéd, you really are limited only by your imagination. There is a dizzying selection of commercial plastic, polymer or silicone texture mats and sheets, rubber stamps, texture rollers, molds, etc. that you can purchase to impress patterns in fresh clay. There also are many different ways to make your own one-of-a-kind texturing materials and tools. You can use water etching, carving, drilling, filing and metal clay appliqué on dried clay. After firing you can use traditional metal working techniques such as hammering to alter the topography of the metal’s surface. Continue reading…