There are so many creative possibilities with metal clay. One opportunity is to roll coils, or as many of us lovingly call “snakes”. Coils may be used for bails, decorative accents, or as a primary part of a piece.
Right off the bat, let me tell you, that rolled coils, are stronger than syringe coils. There is more metal content by volume in lump clay then there is in syringe clay. This extra strength comes with a trade-off, though. Coils take a while to dry when compared with a rolled-out, flat, piece of clay due to the extra volume. Give coils a good hour to dry in air. If after ten minutes of air-drying, your coil seems stable enough to put in a dehydrator or on top of a warmer, then go ahead and do that. Take care that you don’t move your coil too soon. Otherwise, you risk flattening one side or picking up texture from the tray.
This interview appeared in the 2nd anniversary issue of Metal Clay Artist Magazine in 2011. We loved Jen’s work then and continue to follow her career as a jewellery designer. (Note: New pieces from 2016 appear at the end of the article along with contact information to see the entire collection.)
She sells her work through several venues. “I have an Etsy shop and I sell my work at an outdoor Artist Market in Burlington on Saturdays from May through October. I also have my work in a lovely accessory boutique in Burlington called Trinket and I do a few local holiday craft shows and trunk shows.” I asked her what tips she had for artists who want to sell their work in the same way. “If you’re selling online, take fab photos. If you’re selling at a craft show, find or make great displays that jive with your work. And for selling in shops, approach shops/galleries very professionally and creatively. Remember, every part of everything is an opportunity to be creative! Use letterhead with an image of your jewelry on it. If you’re delivering work in a box, make the box beautiful. These are all chances to show how passionate and how good you are and to impress that on people.”
She finds inspiration in science fiction and fantasy and loves a good story where disbelief can be suspended in favour of wonder. Her practical and ultra-organised side is always vyingfor attention alongside her creative and messy side. Each is trying hard to learn from the other and live in harmony.
(or What Distinguishes Inspiration from Copying? – For those younger than 40!)
An often-argued creative concept found in all artistic disciplines, is what distinguishes copying from inspiration? It’s a controversial and complicated issue with a lot of gray areas. For what it’s worth, I offer my take on the subject in the article that follows, hoping to give an insight on what I believe are the origins of inspiration.
Where would the art world be if Monet, who is credited as being the father of Impressionism, railed against his contemporaries (including Cézanne, Degas, Renoir) who followed in his footsteps, embracing this new way of interpreting subjects for their work?
As an artist, I don’t believe that something comes out of nothing. Everything I create is inspired by something; even when I’m not conscious of the origins of the inspiration. If I carefully consider some of my creations, I can recall something that has a hand in my designs and techniques. Perhaps the waves of the ocean, a sunset, or the pattern on a hotel curtain had a role in a creation. Only ego can drive the need to demand a work is truly and purely original.
That isn’t to say that the fine line between copying and being inspired isn’t easily crossed. As an artist who also teaches, this is a shaky area for many. Personally, do not dictate that once a student has compensated me for my knowledge and shared skill, that they are forbidden from putting the technique or design concepts into practice. That isn’t a universally accepted concept. I hear from my students, over and over again, experiences in which teachers told them they cannot use design concepts or techniques learned in their classes if incorporated in anything they teach or sell. I feel that if a student has paid to learn from me for my time and knowledge, they should be able to duplicate what I taught them for any use they deem acceptable. I do expect that they won’t take undue credit that it’s something they originated or won’t reprint or plagiarize any written material I hand out. Also, I’m careful to credit others when using techniques that I didn’t originate. If I don’t know who to credit, I am still careful to make it clear that I don’t deserve credit for concepts that I didn’t develop.
My hope is that those who copy what I teach, do so primarily as a means of mastering what they learned. Ideally, whether for fun or profit, students will go on to modify what they learned from me and modify it to bring their own voice and vision to their creations. Regardless, if I’m not ready to have others use what I develop, I shouldn’t put it out there; least of all receive compensation for teaching what I’ve come up with. A common technique used universally in the medium of polymer clay, is the “Skinner Blend.” This is the method for creating gradient blends with two or more colors of polymer clay, developed by Judith Skinner. It is one of the most widely used techniques in polymer clay. It has also been widely modified by myself, and others into more advanced polymer clay effects and techniques. As in the case of Monet, where would polymer clay be if Ms. Skinner, forbade anyone from using her blending method professionally or commercially?
I look, not only to nature, the imagination (which is feed by countless stimuli each day that accumulates over a lifetime) for ideas, but I also find inspiration in the work of others. I find it both within and outside of my chosen mediums. My goal is never to copy, but to create something that is “original” in as far as I use a shape, color scheme, or design concept I create. I don’t want my work to look like an imitation of someone else’s. I don’t think any true artist does.
Creativity is a slippery slope and ideas don’t occur in a vacuum. This concept is worth repeating if you’re an artist who has ever struggled with the feeling that your creativity has been copied. Ideas don’t occur in a vacuum! On more than one occasion I have experienced or had other artists share the phenomenon of learning that someone else was is doing the same technique or design concept that I (or they) “created.” This is disconcerting when it occurs before I have shared my designs and techniques publicly – in a show, on the Internet, for sale, publication or classes. It can be very humbling to realize that another person has simultaneously or even preceded you in discovered the same “new” technique/design concept as you have.
There is a theory called the “Hundredth Monkey Effect.” It explains that the same idea can mysteriously occur in multiple locations without a direct correlation between them two. There are several websites and even books devoted to this concept. Read it more at: https://en.wikipedia.org/wiki/Hundredth_monkey_effect Clinging too tightly to the ownership of an idea is a dangerous thing and can result in a great deal of personal unhappiness. Who among us doesn’t wish to be recognized for their creative innovation? Making this important to yourself as an artist, robs you of your higher purpose to create and can hold you back from personal and professional growth.
I’ve even been on the receiving end of being accused of taking credit for someone else’s concepts only to find myself having to prove that I developed, introduced or used a design/technique before the accuser. In some cases, it was clear that they didn’t copy me, but it can be uncomfortable to have to defend your work. Having been on both sides of this experience, the oddest example for me was hearing someone I had just met tell me about a friend who told her about a profound artistic experience at an adjacent tradeshow to the one she was working at. Coincidently, I happened to know the same artist personally as a friendly acquaintance. Both of us were demonstrating for the same company, at the tradeshow at the time of this occurrence.
What a shock it was to hear the story retold as it had happened, only it had happened to me! While on a break, I went to the other trade show with a friend. People stopped me to admire work I was wearing. I made it with a new technique I had developed. They though it was a completely different medium and not the one I was using to replicate the look. I went back to the booth where I was working and shared how my “faux’ technique fooled many people at the other show. I shared this story with a group of eight people.
This group included the artist who then went on to tell my story as her own. Later, I saw another artist credit her for the technique in a magazine article. If you’re wondering how I handled it, I decided to let it go. I concentrated instead on developing the technique to take in new and exciting directions. Having done otherwise might have had a crippling effect on my creative ability. My energy was best spent in moving forward in my work and not feeling the need to salve my ego over setting the story straight. This person has to live with their lie, knowing they need the credit belonging to someone else to feel accomplished.
Of course, this is different from when your design concepts are copied and sold for profit in an arena in which you compete for your livelihood. Companies like Wal-Mart and Target have found themselves on the loosing end of lawsuits where they had taken the designs of independent artists, culled from buyers attending shows and had them reproduced – en mass – without the permission of the artist.
I’ve heard it said that sites like Etsy and Pinterest are nothing more than idea factories for other artists. If I have a problem with anyone using my techniques or design concepts for themselves, then I should not be putting it out there to begin with, knowing that in all likelihood, I’ll never be credited or profit from my concepts. Success as an artist for me is acknowledging that my “original” ideas all have their beginnings in something, but for me, it’s important that something is merely and influence and not a mold for me to duplicate.
Image Credits: All images by Lisa Pavelka, copyright to the artist.
Inspiration Credit for Lisa’s art:
Image #1- Inspired by Karl Faberge
Image #2 – Inspired by Karl Faberge
Image #3 – Inspired by 1960s Optical Pop Art
Image #4- Inspired by Dichroic Glass and Ocean Waves
Image #5 – Inspired by Mardi Gras
Image #6- Inspired by William Morris
Image #7- Inspired by Periscopes
Lisa Pavelka, a Colorado native who now resides in Las Vegas. She is an award winning artist, designer and author. Although she is well versed in several mediums, she is best known for her polymer clay expertise. Having worked with the medium professionally since 1989, she has focused her creative energies in taking polymer clay in new directions; especially in the areas of mixed media applications.
As a polymer clay pioneer, Lisa has tackled everything from jewelry making and home décor to scrapbooking and altered arts to name a few. She has shown the crafting world there is almost nothing that can’t be done with polymer clay, whether it’s coming up with new techniques or covering the back of a van.
Lisa is author of three books including the award winning best seller: Polymer Clay Extravaganza (North Light Books), and DVDs—Gifts from the Heart & Hand (Page Sage) and Claying Around with Lisa Pavelka(2007).
She’s been creative from an early age. “There’s the really early mud pie phase, but my first efforts at actually making something would be when I was about six or seven and my grandmother taught me to sew on her Singer treadle sewing machine. Not sure how I reached the treadle, but I’ve been sewing ever since. I was hell bent on becoming a fashion designer. Now I’m relieved that never happened and I still enjoy making my own clothes.”
She continued, “I was pushing 40 when I began making and selling my jewellery. Before that, my resume reads like a novella. I worked in clothing retail, was a department store buyer at 19 and assistant manager of a mall store boutique at 21, then moved on to more clerical work, working in offices, then banks and real estate lending. My favourite job title was File Librarian for the Medicaid Billing System for the State of Florida … talk about a paper pusher! I’m a firm believer it’s never too late to discover and follow your bliss.”
Kathy considers herself to be a designer/maker rather than a jeweller. She lives in Gainesville, Florida with her husband. “Dave and I will have been married for 36 years in July 2016. We currently share our home with one senior citizen kitty, 18 year old Miss Zoe. Last year we bought a classic mid-century, concrete block and terrazzo floors ‘atomic ranch’. It’s an east/west orientation and has the most wonderful morning and afternoon light, perfect for leisurely mornings sipping tea and reading the NY Times.”
Her work is so unique, I asked her what her main influences are. “It kind of depends on what I’m making. My more minimal CORE body of work tends to be inspired by patterns in nature and clothing. Repetition of form is a regular theme in my work. How many ways can I use just one element? And in clothing, I’m kind of obsessed with a whole genre of European and Japanese designers whose work is raw and somewhat avant-garde.”
“My Urban Primitive work is inspired by the ornament of ancient cultures of the South Pacific, Oceania and South America as well as Japanese folk potters. And for general visual juice, the NY Times Style magazine and the Wall Street Journal monthly magazine always have at least one little inspiring bit of something.” I asked Kathy which of her pieces she feels reflect these influences best. “My ‘Stacked Cubes’ necklace is an excellent example of the clothing/repetition inspirations and ‘Aegean Muse’ very much speaks to the Oceania/tribal influences.”
Like many of her contemporaries, Kathy first heard about metal clay in the article in Ornament Magazine in the 1990’s. “I can honestly say that article changed my life,” she explained. “It was about the first group of makers with Tim McCreight at the helm, set up for a week or so by Mitsubishi at Haystack School in Maine.
Coming from a clay and pottery background and having no real interest in traditional metalsmithing or fabrication, it was literally a dream come true.” “My clay background was immensely helpful – no fear of kilns! Late ’97, I bought a 100 gram lump of original PMC, hauled out my clay tools and dove in with a tiny clay test kiln with manual controls that I rigged up with a digital pyrometer. I had to watch the temperature and dial down the controls until I could get it to hold at 1650 for the 2 hours. Tedious, but that was long before there were any small, affordable digital kilns. I think the first things I made were some dangly bits for earrings and beaded necklaces.”
“These are what I think of as my fancy, ‘look at what I can do’ show pieces. Each new version of metal clay allowed an expansion of techniques and experiments which led to my jewellery getting more and more elaborate as in my ‘Vertebrae’ collar.” This is PMC3 and white beach glass fumed by the silver, recycled glass beads wrapped with PMC3 strips, and the pendant is beach glass and glass frit. It’s all lashed together with linen.”
The nature of Kathy’s work is pretty organic so I was interested in how much planning goes into each piece. “I sketch a bit, but not much. I’m more likely to write descriptions of ideas with very rough sketches. In addition to bigger focal elements, I like to make a whole bunch of components, lots and lots of the same element. My CORE group of work is all about repetition of form and it’s always a joy to sit at my worktable working out all the ways an element can be used.”
“For the Urban Primitive pieces, I sit down to my worktable, see where my gaze lands and start pulling out gems and artifacts and bits and bobs. It feels very much like composing through improvisation. I assemble my palette and let intuition guide me. The completed piece is always a delightful surprise.”
As such a lover of metal clay, I asked Kathy if she used any other techniques in her work. “I do utilize some silver smithing skills, mostly very simple soldering with a butane torch and easy solder paste,” she explained. “I make all my own findings, ear wires and clasps. My variation on the “S” hook is forged and soldered. And cord, golly do I love making cord. I’ve taught myself how to ply cord into various thicknesses in lengths up to 6’ or 8’ and, via YouTube, how to braid 3 and 5 loop cords. The loop braided cords are time consuming and the length is limited by my arm span, not much as I’m 5’2”, but they are complex and lovely and a nice complement to my more minimal pieces. The cords in combination with hand cut leather and stitching provide a beautiful, earthy element to the work.”
I asked Kathy if she had a particular piece of work that really means something to her. “I remember the first big piece I sold. It was called ‘Le Monde’. It was a statement piece of graduated, highly textured original PMC beads alternating with artisan lampwork glass Basha beads by Barbara Metzger and Rory Ross’ raku beads. I was at a really teeny local craft show and had the piece with me, basically for show. A couple I knew, well known collectors and art patrons, wanted to buy it. I was stunned. ‘How much was it?’ Uhhhh, $800? SOLD! I packaged the piece up, sent the lovely couple on their way and then promptly burst into tears. I felt like I had truly arrived.”
I asked Kathy to tell me a bit more about where she sells her work. “At first, I sold my jewellery at juried craft fairs and wholesale to small galleries and women’s boutiques,” she explained. “In ’06 I designed a lovely little wholesale collection and connected with a team of sales reps. Through what was then the Gift Show circuit, they got my work into museum stores like the San Francisco Museum of Modern Art, Seattle Art Museum and high-end craft galleries like Real Mother Goose in Portland, OR and the Ansel Adams Gallery in Yosemite.
I’m really proud of the fact that at one point I had close to 50 wholesale accounts, all done by me, all fine silver PMC. I supported our family and put my husband through his first librarian certificate degree with my jewellery. These days, I have a couple of galleries that I still work with, but now I sell my work mostly through my own website.”
Images: “Landscape Rings” and “Landscape trio 3” by Kathy Van Kleeck
I asked Kathy what she is currently working on. “Interesting thing, this question and it’s got me quite gummed up. I’ve been developing a new group of jewellery with the working moniker of Bare Bones, looking to the ornament of very primitive cultures for inspiration and how to loosen up my already minimal work, make things less pristine. I’m exploring how I can further deconstruct what I do, make it less refined, almost crude, but still wearable and durable. I thought I was moving right along on this recent track, but deciding on an image to share stopped me dead. I have a feeling there’s going to be a lot of tweaking, more exploration and revisiting some themes of past work.”
“Whatever I do next, it will be the most authentic expression of my aesthetic to date and since it’s all still very much in my head, I don’t have any images to share. As of right this moment, the ideas feel very fresh and exciting, making me want to step immediately away from this keyboard and get to work!”
She went on, “PMC3 remains my favourite metal clay as it allows me to work very dry, folding and layering components till they barely hold together. To a lesser degree, I also use BronzClay and Hadar’s Steel. I’d like to do some larger, focal pieces in combination with other mediums. Right now, concrete is calling to me and maybe fused glass or eco resin or some combination of all of the above mediums and metal clays. A lot of what I do is pretty minimal and rustic. I want to go even further with that, in the vein of “art brut”, create work that is raw, but full of heart and life, work that is stripped to the absolute and essential core, but fully resolved and engaging.”
She finds inspiration in science fiction and fantasy and loves a good story where disbelief can be suspended in favour of wonder. Her practical and ultra-organised side is always vyingfor attention alongside her creative and messy side. Each is trying hard to learn from the other and live in harmony.
Since gold clay is so expensive, might there be a way to combine it with silver clay and still have a finished metal that appeared gold in color, but would be less pure than PMC Gold clay and therefore, a little less expensive?
The ancient Greeks and Romans were aware of such an alloy, which occurred both naturally and man made. They called it “electrum” and used it for coins, jewelry and plating. My reading led me to discover that an alloy of more than about one third silver would result in a metal that appeared silver, that is, no gold color at all. Ancient alloys seemed to be no less than about 20% silver. Therefore, my plan was to combine a variety of gold and silver PMC mixes so that the alloys were in that sweet spot of 20-30% silver, to see what shades of gold would result. Continue reading…
My cuff was mailed to artist Hayley Kruger in the U.K. who in turn cut out pieces of it and added to it using paper, crayons, pespex and ink.
A third artist, Lisa Welbourn made a necklace from the work of the first two artists. She added sterling silver, silver clay, lava beads, rubber neck cord. Lisa also decided to combine some of the elements to make them double sided.
A second piece I worked on was started by Joy Funnell. Can you imagine receiving a fine silver and enameled piece from Joy and you are to “change” it or work on it? Oh I was a bit scared! It was a beautiful piece!
Jeannette Froese LeBlanc is the editor of Creative Fire and former editor of Metal Clay Artist Magazine. She keeps a studio in rural Ontario, Canada and works in etched aluminum and metal clays. You can find her work online www.SassyandStella.com
Here is my review of the new clay:
WET FORM: Moisture content and workability:As I waited several weeks to test the clay it may have lost some of its plasticity while in the temporary wrapping. I added a few drops of water and worked it in and found the clay to be beautifully smooth, easy to roll, it picks up texture nicely and joins are solid. (My release agent was olive oil.)
DRY FORM: How was the flexibility, was it easy to carve, sand, join? What an amazing clay to carve! There are no “tears” at the end of a push with a carving tool. Clean edges!
Firing:No blistering or cracking. In my first firing I forgot to support a ring and so it slumped. I was curious about the clay and hammered the ring round and straight–it could take the abuse! All items out of the kiln have the satisfying “clink” of sintered metal and they are a matt grey. Some pieces I hammered and others I tumbled.
Shrinkage:Ring #1-1.5mm thick wet clay, wet clay size: 11.5, dry 10.5 and after firing 9.5, Ring #2-1.5 mm thick wet clay, wet clay size: 12.5, dry 12 after firing 10.
Rings warped in the firing, as I forgot to support them properly, hammering them brought them back into shape without increasing the size.
Finishing:I hammered some pieces directly out of the kiln and then I tumbled them to finish the polishing. Rings were polished further with a 3m polishing brush and patinaed with LOS.
Jeannette Froese LeBlanc is the editor of Creative Fire and is an avid jewellery designer. She has worked in metal clay since it first came on the market. You can find her jewellery online: www.SassyandStella.com.
I was introduced to the work of Canadian artist Véronique Roy by Jeannette Froese LeBlanc and as soon as I saw her pieces, I knew this would be an interesting article. There is a simplicity and purity about her work that is so attractive, I really looked forward to learning more about her. Veronique was brought up in Montreal and now lives in a small village in the Laurentians which is a mountainous region in Québec, Canada.
“I consider myself as a creator, a maker and a jeweller. Also a businesswoman!” she told me. Her studio even has a name! “I work from a small workshop on the edge of the forest, in my backyard. To get there, I have to cross a little stream that runs through the land. The workshop was built three years ago, with the help of my friends. As my work was encroaching too much on the living space of the house, it was time for a change and to have an exclusive space for Brelokz (the name of my studio).” How cute is this snowy little house, like something out of a fairy tale?
Véronique has always valued her creative side. “Creativity has always accompanied me in how I see life. When I look at things, my eyes capture details that can escape others at a first glance,” she says. “From the beginning, I felt that metal clay would play a central role in my professional development.” I asked her about her first experience with metal clay. “I discovered metal clay almost six years ago. I attended a training course to learn basic silver clay techniques. I immediately fell in love with this somewhat capricious material which allows working in so many different ways. I remember that my first piece (a pendant) was not at all to my taste, but it was a model that was required for certification in the course.”
I find the organic nature of Véronique’s work really aesthetically pleasing. “My creative process can find its initial spark anywhere! Ideas can germinate without my noticing it. Sometimes when I am taking a walk in the forest, or even when I am reading a newspaper article,” she explained. “Nature is my primary source of inspiration. Besides living in a small village in the countryside surrounded by mountains, I also have a personal interest and a formation in herbalism. These played an important role in paving the way to create jewellery from nature’s textures. One day, I was tending to my garden, and saw a tomato leaf wrapped around my finger, which brought a clear image of a leaf ring! Step by step, I started using leaves for my pieces. The four leaf rings are the first pieces that defined my artistic process. I consider them as the basic image that represents my collections. They capture the essence of nature. Simply.”
“Initially, I started with medicinal plants thanks to the influence of my herbalist background. Then, I started looking for plant textures suitable for the material. Gradually, I evolved towards other materials, always keeping contact with my initial source of inspiration. Honeycombs found their way to my heart and imagination. Oak bark and coral were to follow. I use the materials as simple and pure as possible, without too much transformation, in order to preserve their primary nature. As a result, the essence of nature is captured in metal, eternally.
I asked Véronique about her creative process. “When the idea is there, I have to find the source material, and usually make it into a mold. As I only work from organic textures, I have to preserve them to be able to work with them even in winter, when they are buried deep in snow. After the mold is ready, I experiment, try, and test. As soon as I find the form and the finish that I wish to bring out, I go for it. Thus a new collection starts to see the day; quite simply. The process rarely involves designs or notes, but is mainly created in my mind and by taking action. This is also similar to how I live my life. If I have an idea, I have to put it into action as quickly as possible; otherwise, the idea loses its breath and lustre. Living with the passion of the moment!”
Véronique likes to keep her creative process somewhat separate from the rest of her life. “I am in the workshop to for the creation process, whereas I have an office at home for complementary processes such as packing online orders for mail,” she explained. “The workshop is the place where magic takes place, and each piece is created from A to Z. While I try to keep regular weekday work hours, in the period of exhibitions (about 15 shows a year) I usually work double time! You can call me someone organised in chaos, which is clearly reflected in my workspace. Forget the Pinterest image of a well decorated workshop, mine is quite far away from that. I make a big clean-up three times a year (!!!)”
I asked Véronique to describe her style. “I like to follow trends from a safe distance as I don’t like them to influence my work. Trends come and go, changing in the blink of an eye, and sometimes enjoying rebirth after many years; whereas I prefer to create by remaining true to myself; thus my pieces remain timeless. I consider my style to be timeless, organic, and even pagan to a degree! Simplicity and beauty of nature is reflected on each piece.”
Véronique uses several other techniques in the production of her work in addition to metal clay. “I make my own earring hooks and rings. I recently started collaborating with a company where I have some of my pieces cast in .925 Sterling Silver. This new way of working allows me to give more time for the creative process while somewhat cutting down on the time required for production. A few pieces of my Oak Bark collection will also be offered in gold as of 2016 summer, thanks to a jeweller working with traditional techniques who helped to open a door for a new path!”
I asked Véronique what she does to relax. “Travel, discovering new places, new faces,” she began. “Last year, I had the chance to visit Costa-Rica. This summer, I intend to visit Turkey, and I dream about visiting Spain next year. This, for me, is a way to open the gates for inspiration and restoring the energy that is somewhat depleted come spring (winters are long in Québec). Therefore, I prepare my backpack and hit the road. I also like to read and go to music shows.” I asked her if she wore her own jewellery when she is travelling, or even day to day. “I love jewellery, I create them, but I only wear small bronze studs,” she laughed.
So where does Véronique see herself going with her jewellery creation? “I would simply like to continue finding inspiration,” she said. “Sometimes, around the month of January, I feel like the well is dried up and I will never have any more ideas! It is winter. The high season of shows has just ended, the excitement has waned, and I feel the need to think about the spring and new collection ideas. I ask myself whether I will be able to find new ideas, and continued inspiration is what I wish with all my heart!” She sells her work in several places. “I sell online, through my Etsy shop. My creations can also be found in several stores that sell works of Canadian creators. And I sell in exhibitions all over Québec and Ontario. I believe that by participating in shows throughout Québec and Ontario, I help demystify this material in the eyes of the public and traditional jewelers. I hope to continue doing this and presenting my creations while introducing the material so that one day people will get to know it better. I see myself continuing to work with this material as long as I have fun doing it, because, above all, it is the pleasure that keeps the passion going!” Absolutely!
Finally, I asked Véronique what she is currently working on. “At present, I am working on my Oak Bark collection as well as a small series of jewellery created from Lilac twigs.”
It was such a pleasure to spend a little time getting to know Véronique and I look forward to seeing her new work in the years to come. To find out more about Véronique, visit her here… www.brelokz.comwww.facebook.com/Brelokz.Bijoux
JULIA RAI is a teacher, writer and artist working in a variety of media. She is the director of the Metal Clay Academy and runs the Cornwall School of Art, Craft and Jewellery. She finds inspiration in science fiction and fantasy and loves a good story where disbelief can be suspended in favour of wonder. Her practical and ultra-organised side is always vyingfor attention alongside her creative and messy side. Each is trying hard to learn from the other and live in harmony.